| Applications: |
- Acrylic Display Stand
- Decorations
- Signage
- Gaskets
- Architecture models
- 2D Prototypes
- Marquetry
- Die Board
- Embroidery and Textile
- Router Template Stencils
- Plastic Fabrication
- Photo Frame
|
|
Materials Applicable:
Acrylic, Veneer, MDF board,
Wood, Plywood, Masonite , Rubber, Vinyl, Foam, Nylon, Cloth, Textile,
Polycarbonate, Fabric, Chipboard, Cardboard, Paper, ABS, Polyester,
PP, Leather.
| Specifications: |
|
EZ LASER -
LEE Series
|
|
Laser Source
|
RF 25 Watt Sealed CO2 Laser
Tube(Air-cooled) |
RF 60 Watt Sealed CO2 Laser
Tube(Air-cooled) |
|
Net Weight
|
200 Kgs |
210 Kgs |
|
Working Area(WxD)
|
914.4 x 609.6 mm (36" x
24") |
| Maximum Part Size(WxDxT) |
955 x 675 x 230 mm (37.6"x
26.6" x 9") |
| Overall Dimensions(WxDxH) |
1210 x 1036 x 1040 mm (82.7"x
84.6" x 48.2") |
|
Computer Communication
|
Parallet port with supplied
cable |
|
Memory Buffer
|
64 Mega
Bytes |
|
Standard Focus
Lens
|
2.0" |
| Engraving Speed (Max) |
Up to 1524 mm/sec (60
inch/sec) |
| Laser Power Control
|
Digital laser power control
with automatic proportional pulsing and 8 colors linked power
setting per job |
| Power Supply |
Single phase, 220VAC, 6 Amp,
50/60Hz |
|
Windows Driver
|
EZ-LASER | |
| Available Options: |
|
EZ LASER - LEE Series
|
|
Red Point
|
To help visible beam on workpiece position
tool |
| Honeycomb Table |
To minimize burning in the back side of
materials |
| Beam Expander |
To get similar laser dot whether far or near point on
workpiece |
|
Focus Lens 1.5"
; 2.5"
|
1.5" for smaller laser dot ; 2.5" for thick
workpieces |
| Dual Head |
To increase production rate |
|
Compressor
|
To provide flowing jet air for Air-assist especially
on rubber material application |
|
Dry Air Machine
|
To prevent focus lens from humid damage while laser
beam pass
through |
|
| Facility Requirements: |
|
EZ LASER - LEE Series
|
|
Host
PC
|
Windows 98 , ME , XP capable system |
| Exhaust System |
One exhaust blower (3/4HP), Pressure 70 mmAq, Air flow
16m3/min, with one 6" diameter hoses |
|
|
